How To Fill A Hole With Polyfilla

If you want a truly blemish free MDF surface, then you might need to apply some forest filler. It really is that elementary.

If you lot don't, and so those nail holes all along that MDF trim are going to stand out…even through a coat of pigment.

But, while wood fillers pair well with natural solid forest, their performance can be more hit and miss when it comes to MDF.

Then, why wouldn't you but utilize something similar Polyfilla instead? This product tin exist used on wooden surfaces, so why not MDF too?

Well, in this mail, you volition learn why not all woods fillers work well on MDF'southward composite material. Y'all will as well discover what the key differences are betwixt Polyfilla and Wood Filler (despite their many similarities).

And we explain what this means for applying Polyfilla onto MDF. Then, let'due south get into it…

This post may contain affiliate links to products that nosotros receive a commission for (at no boosted cost to yous). Larn more hither.

What's The Best Way To Make full Holes In MDF?

A bit of woods filler will work nicely at filling in any gouges. Wood filler tin be sanded downward and painted onto too. But, information technology cannot take any penetrating finishes (such every bit oil-based forest stain).

So if you plan on finishing MDF, (with a coat of paint or an otherwise clear sealer), then wood filler will get the job done.

Related Mail: Wood Filler Showing Through Paint? Fix It In 3 Easy Steps! | The Woodwork Place

What Does Woods Filler Do Exactly Anyway?

Wood filler works kind of similar a sealer, but instead of waterproofing the surface of wood, it packs out whatever gouges or holes. Information technology then dries into a hard tough substance.

So, Tin Yous Easily Add A Wood Filler To MDF?

Woods filler can be applied to wood, and MDF is a woods composite. Which means that wood filler will adhere to an unfinished MDF surface.

In fact, it is a groovy manner to pack and hide those tiny nail holes left in newly installed MDF trim.

Related Mail service: What's The Best Nailer For MDF Trim? | The Woodwork Place

What's The Best Filler For Filling In MDF Joints?

When it comes to MDF, not all types of fillers piece of work well with this manufactured wood. This is because MDF soaks up water readily, and is easily h2o damaged.

Once h2o gets underneath the surface of this composite material, information technology takes a actually long time to dry again. This, in plow, gives wood rot plenty of fourth dimension to do its worst to this engineered wood.

So, MDF'south ability to absorb h2o at an incredibly fast rate puts a limit on the kind of finish you can apply on information technology.

Now, h2o-based woods fillers set faster than their solvent-based counterparts, because their h2o content allows them to dry and evaporate more efficiently.

However, if you apply water-based wood filler, MDF will soak up that fillers water content…well before the filler has had time to properly ready.

So, always stick to using solvent based wood filler, when it comes to fixing damaged MDF surfaces.

And Is Polyfilla A Wood Filler Too?

No, it isn't, although information technology does human action in a similar way to wood filler. Instead, Polyfilla is a spackling paste, the kind used by painter decorators to repair small imperfections in physical and brick.

And just similar wood filler, Polyfilla can be sanded down and painted over likewise.

While it tends to be used mostly on concrete and brick, Polyfilla can also exist practical onto wood grain. And then, this paste tin can be used to mask any dints and dents in MDF's surface.

Can You lot Utilize Polyfilla To Fill In Brad Boom Holes In MDF? When it comes to tiny spiral holes, Polyfilla will easily cover those visible brad boom holes.

To Sum Up, Here Are The 3 Fundamental Takeaways From This Post…

• 1). The best way to make full in holes on MDF is to utilize a solvent-based forest filler.
• 2). Polyfilla isn't wood filler (in the traditional sense). However, it can all the same be used to hide small holes in MDF.
• three). Both woods filler and Polyfilla can be sanded, and painted. Still, neither 1 volition absorb a penetrating finish.

Reference:

Bahri, M. A. S., M. M. Ratnam, and HPS Abdul Khalil. "Functionally graded wood filler–recycled polypropylene composite: Effect of mechanical loading on deflection of cantilever beam."Advanced Composites Messages 29 (2020): 2633366X20922856.

Source: https://www.thewoodworkplace.com/can-you-use-polyfilla-on-mdf/

Share this post